The Chugger lineup of brewing pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling. The pump head can also be rotated 360 (in 90 intervals) allowing for even more customization. Features: Polysulfone Head. Food Grade up to 250 F. 1/2" mpt inlet and outlet. High Flow rate of 7 gpm. Max Head 18.9 ft. 115v 55" cord and plug attached. 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Rotatable head for custom configuration. Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!