Everything you need to use your counter-pressure filler. Connects your new Counter Pressure filler to your existing kegging system with a convenient, included, plastic inline quick-disconnect. Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set (see Gas and Beverage quick disconnect sets on preceding page.), 6' of gas line. Hardware to connect filler to keg: Threaded, red beverage out qd, related flare fittings, 5' of beer line To install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.